MATERIAL PROPERSTIES

Excellent
Seawater & Atmospheric Corrosion Resistance

Excellent
Machinability

Medium / Good
Strength

High
Shapeability

High
Welding Capability

CHEMICAL PROPERTIES

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Ga	V	Remarks	Others (Each)	Total	Aluminium
EN AW-5083	0.4	0.4	0.1	0,4-1,0	4,0-4,9	0,05-0,25	–	0.25	0.15	–	–	–	0.05	0.15	Remainder

Specified Thickness (mm)	Tensile Strength (Rm / Mpa)	Yield Strength (R_p0,2) MPa	Elongation min. % A_{50 mm}	Elongation min. % A	Bend Radius^a 90°	Hardness HBWa
3 < T ≤ 6,3	275 – 350	125	15		1,5 _t	75
6,3 < T ≤ 12,5	270 – 345	115	16		2,5 _t	75
12,5 < T ≤ 50	270 – 345	115		15		75
50 < T ≤ 80	270 – 345	115		14		73
80 < T ≤ 120	260	110		12		70
120 < T ≤ 200	255	105		12		69
200 < T ≤ 250	250	95		10		69
250 < T ≤ 300	245	90		9		69

Specified Thickness (mm)	Tensile Strength (Rm / Mpa)	Yield Strength (R_p0,2) MPa	Elongation min. % A_{50 mm}	Elongation min. % A	Bend Radius^a 90°	Hardness HBWa
3 < T ≤ 6	305	215	10		2,5 _t	89
6 < T ≤ 12,5	305	215	12		4,0 _t	89
12,5 < T ≤ 40	305	215		10		89
40 < T ≤ 80	285	200		10		83

Specified Thickness (mm)	Tensile Strength (Rm / Mpa)	Yield Strength (R_p0,2) MPa	Elongation min. % A_{50 mm}	Elongation min. % A	Bend Radius^a 90°	Hardness HBWa
3.0	305	215	10		2,5 _t	89
4.0	305	215	10		2,5 _t	89
5.0	305	215	10		2,5 _t	89
6.0	305	215	12		4,0 _t	89
7.0	305	215	12		4,0 _t	89
8.0	305	215	12		4,0 _t	89
10.0	305	215	12		4,0 _t	89
12.0	305	215	12		4,0 _t	89
15.0	305	215		10		89
20.0	305	215		10		89